Cura Start gCode with Purge-Line

Cura Start gCode with Purge-Line

This gCode is intended to prevent a collision with the camera at the print start and therefore moves diagonally onto the print bed.

Code: 
G90 ; Set to Absolute Positioning
M82 ; Set extruder to absolute mode
G21 ; Metric values
M107 ; Start...
You do not have permission to view the full content of this resource. Log in or register now.
Author
Ben
Views
510
First release
Last update
Rating
0.00 star(s) 0 ratings

More resources from Ben

Top Bottom