Search results

in ideamaker there is a setting for belt printers (from memory it is in the printer setup area) there is no specific profile for the ifactory ( or creality) belt printers

all versions of cura use usb to directly send to the printer, or save the gcode to a usb/sd/tf card storage for physcal inserting in the printer, and as an alternative for the octoprint users, ther is a cura marketplace plugin called 'octoprint connection' that once set up and configured can...

in octoprint 1.17.3(any version after 1.15) it is the 'octopi-wpa-supplicant.txt' in the boot partition of the card also suggest using notpad++ for the editing of the file as the default txt file editors in windows and mac like to ADD extra crlf sets to the files which render the file unreadable...

it looks genuine to me, and the specs match what i have been given in the past, BUT I also would prefer that there had been linking inside the COMPANY website to the new address( and with info regarding the pro being also available here)

are you using a 'belt' slicer(eg blackbelt cura, creality belt slicer ifactory cura beta 3, ideamaker), or a flat slicer(eg cura matter control prusaslicer etc)?, if flat that is the cause

I have seen posts and comments from mosaic, that none of the palettes are able to do colour(filament changing in controlled locations) on belt printers due to the angled slicing and would only be able to do the bulk, random and filament join for belt printers

they were the features I want, BUT without them it is useless to me, so requested a full refund for my unshipped air delivery order from march(the airshipped were supposed to have been shipped in late october, but had not been shipped in november

I have heard that the palette 3 and pro does not haver the 'bulk' or multi roll joining at present, and also will not work with octoprint (by mosaics choice) and will only work with their online slicer which again further reduced its functionality to me, I am thinking about getting a refund for...

given that the palette software (and slicer) are only for the flat plane printing( at present as far as I know) not belt printing, the only way to use one would be for filament joining in either the runout/join to next roll or random modes and NOT for change material for different parts of the...

the heatblock looks to be a standard e3d volcano, and should be able to unscrew from the heatbreak( that connects the heatblock to the extruder), if the nozzle was moved out from the heatblock, it would be sensible to check the threads of the nozzle (if you have an m6 nut it should be able to...

a simple google for xt60 connector indicates that it is mostly used in RC craft for connections to the main power storage & charging the 3d printer control board connectors are usually jrt in 2 pin, 3 pin or 4 pin, and the connecter on the stepper motor is a jrt 6 pin(these are from other...

I think it is also to have a volcano hotend and a geared extruder and a meanwell power supply

a multiprinter location in the central coast of nsw australia(my one plus is still not received so at present just stirring the forum)

I only have a mere 11, my first was a blue eagle labs kossel clear, then a perspex i3 clone(since recycled into a all metal small corexy), cobblebot basic, tevo tornado, anycubic mega s , another perspex i3 clone with diamond hotend, ender 5, ender 5 plus, a modified ender5 plus, a cr30...