English (US)

Reply to thread

Message: <blockquote data-quote="harpo99999" data-source="post: 292" data-attributes="member: 86"><p>the heatblock looks to be a standard e3d volcano, and should be able to unscrew from the heatbreak( that connects the heatblock to the extruder), if the nozzle was moved out from the heatblock, it would be sensible to check the threads of the nozzle (if you have an m6 nut it should be able to screw onto the nozzle when the threads are clean) and also do a visual inspection of the heatblock  and threads, (there should be NO cracks near the filament path/nozzle).</p></blockquote><p></p>

Top Bottom